KILZ® ORIGINAL LOW ODOUR Interior Primer
KILZ ORIGINAL LOW ODOUR is an interior oil-based sealer, adhesion promoter and stain blocker with less odour than typical oil-based primers. It also features fast odour dissipation technology which means no lingering odour.
Seals Porous Surface
Promotes Adhesion
Hides Previous Color
Helps Block Heavy/Severe Stains
Available in 946 mL & 3.79 L sizes
Please check availability before visiting your local retailer.
KEY FEATURES
Oil-Based. Lower odour that typical oil-based primer, Fast odour dissipation technology. Heavy stain blocking, excellent adhesion (except for wood), Fast drying, Smooth application experience, Great hide, Sandable and Seals Porous Surfaces.
BEST FOR USE ON
Interior surfaces. Best for spaces that are sensitive to strong solvent odours or when painting in an occupied space. Use on drywall, plaster, brick, masonry, concrete, cinder block and fiber cement. Do not use on wood especially wood that is worn, weathered or is tough to stick to.
Coverage
28-37 m2 per 3.79 L
TECHNICAL DOCUMENTS
- All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances.
- If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
- Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.*
- Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface.*
- Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming. Note: KILZ 3® PREMIUM and KILZ 2® Primers are recommended for mildew-prone surfaces.
- Masonry, Brick, Stucco and Plaster: KILZ ORIGINAL LOW ODOUR Primer may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ ORIGINAL LOW ODOUR Primer.
*WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Center at 1-800-424-LEAD or log on to www.epa.gov/lead.
Application
- Eye protection is recommended. Do not thin. Stir thoroughly before and occasionally during use. Apply using a brush, roller or sprayer. Any slight odour that is detected during application will diminish quickly.
- Use product when painting surface and air temperatures are between 35°F (2°C) and 90°F (32°C).
- Brush – High quality Nylon/Polyester
- Roller – High quality 10-13 mm nap on smooth surfaces or 13-19 mm nap on semi-rough or porous surfaces
- Airless spray – .015-.019 tip / 60 mesh filter
- Prime the entire surface to ensure a uniform appearance of the topcoat.
- Stainblocking: After priming, test for stain bleed-through by applying the topcoat to a small section. If the stain bleeds through the topcoat, apply a second coat of primer and test again before topcoating the entire area. If bleeding continues, a longer dry time is needed before topcoating.
- Tinting: Up to 60 ml of universal colourant per 3.79 L. Tinting to a lighter shade than topcoat is recommended.
- Coverage: 300-400 sq. ft. (27.87-37 m2) per gallon depending on application method and surface porosity.
Read More
Dry Time at 77°F (25°C), 50% RH
- Dries to the touch in 30 minutes.
- Recoat or topcoat after 1 hour
Read More
Clean-Up & Disposal
- Clean equipment and paint spatters with mineral spirits or acetone. Immediately after use, dispose of soiled rags and waste in a closed, water-filled container.
- Do not dispose of this product down a drain. Please consider donating any unused product.
- If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. For recycling or disposal information contact your local household refuse collection service.
Read More
Read More
WARRANTY
LIFETIME LIMITED WARRANTY
Masterchem Industries LLC warrants to you, the original residential consumer purchaser, the performance of this product as described on this label for so long as you reside in your home. If this product is found to be defective upon inspection by its representative, Masterchem Industries LLC will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty is not transferable. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. For warranty service, call: 1-866-774-6371, or email: [email protected]. Masterchem Industries LLC reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
†Warning!
This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
†DANGER!
If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
First Aid
- If swallowed, do not induce vomiting. Get medical attention immediately.
- If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately.
- In case of eye contact, flush eyes immediately with plenty of water for at least 15 minutes and get medical attention.
- For skin, wash thoroughly with soap and water.
KEEP FROM FREEZING. If frozen, let thaw at room temperature.
KEEP OUT OF REACH OF CHILDREN
Read More
PRODUCT SPECIFICATIONS
Base
Oil
Int/Ext
Int
Colour
White
Coverage - Low
28 m2 (300 sq. ft.)
Mils Wet
5.3
Mils Dry
3.0
Coverage High
37 m2 (400 sq. ft.)
Mils Wet
4.0
Mils Dry
2.2
Finish @ 85°
< 10
Min Application Temp
35°F (2°C)
Max Application Temp
90°F (32°C)
Viscosity
85 - 95 KU
Dry To Touch
30 min
Dry To Recoat
1 hour
Max Tint
15 ml per 3.79 L
VOC
331 g/L
Brush
Nylon / Poly
Roller - Smooth Surface
10-13 mm nap
Roller - Porous Surface
13-19 mm nap
Spray Tip
.015 - .019 tip
Spray Filter
60 mesh
Spray Pressure
2500 - 3200
Volume Solids
55.9% (+/-) 2%
Weight Solids
79.1% (+/-) 2%
Flashpoint
102°F (38.9°C)
